My conversions of some of my Bromptons into external gear 3speed & 4speed lightweight bikes is a personal thing, creating Bs that suit me & my limited power generation capabilities. I think that “power hides things” & I was bogged down by/with 3 factors; slow tyres, IGH hub drag, excess bike weight
Rudolph (Chpt3 v2 S6E-X) was “illuminating”, with fast tyres & a lot less weight than Clarence was running (S6R with Marathons, Brooks saddle, etc, etc). At first I couldn’t put my finger on what was holding back Clarence but once my experimenting with a 2speed rear wheel (acquired some time before, for “the parts bin”) & swapping accessories & tyres, here was a B that was lively & effortless (in comparison). With Covid lockdown (#1) & noticing lightweight parts available, the journey began!
Becoming aware/awake to component weight differences, I’ve tried to limit extras & only replace parts with lighter items. My extras are lights, bidon cage & essentially, a roller wheel extender to primarily protect the Ti rear frame “ears” (having seen a lot of pics of broken Ti frames with savaged roller wheel mounts, I’m hoping the extender is “insurance”?). Probably my first weight-saving consideration was the seatpost area. With a steel seatpost, Pentaclip & Brooks saddle weighing about 1kg, my replacements provide a saving of 500g – hence my following of the Brompton proverb, “Look after the grams & the kilos will look after themselves”. Nowadays there’s very little steel bits left on Clarence & BB, just the mainframe & stem?
Tinkering to improve/tweak performance has come from countless people before me, their tales littering the Internet. Lockdown learning skills & capabilities has shown that the tolerances to modify parts is tiny & often I’ve had to marvel at the original Brompton parts & design. I’d have to say that many of my Brompton tweaks require a “mechanical sympathy” & aren’t going to suit everyone – eg the SunRace shifter is great; I just need to feel when to feather the lever a touch! The whole derailleur system needs precise setup & variations between components & frame tolerances can make for some frustrating/baffling times – eg BB’s 3speed vs Clarence’s 4speed, where exactly the same derailleur & shifting components are used – but with different wheelsets!
So, to now see Brompton’s new P Line Urban models released is partly justification & reflective: I’m content with my creations but now I get to see how Brompton would do their redesign. In brief, I’m impressed/awed/appreciative – & already frustrated to see the “social media knockers”. I’m suspecting the first bike reviews to make many eat their words (hopefully not me?).
Perusing Brompton’s website (& apologies for pinching all the pics below) reveals countless touches – many unexpected. The P Line Urban seems truly a 2speed redesign, where the factory have noted flaws & taken their chances.
My main observations:
• The rear frame ears
• The external mudguard stays
• The 2-position seatpost locking
• The Pentaclip redesign (with oval saddle rail suitability)
• The derailleur design
• The rear hub design (& tweak possibilities?)
• The new 20spoke front wheel
• The roller wheel frame
• The website Support section videos
• The engineering efforts throughout
Now let me see, what weight savings could there be? Hmmm… golly, Clarence & BB are under threat!?
Leave a Reply